Vertical Axis Research Articles

Using your head - cranial steering in pterosaurs.

The vast majority of pterosaurs are characterized by relatively large, elongate heads that are often adorned with large, elaborate crests. Projecting out in front of the body, these large heads and any crests must have had an aerodynamic effect. The working hypothesis of the present study is that these oversized heads were used to control the left-right motions of the body during flight. Using digital models of eight non-pterodactyloids ("rhamphorhyncoids") and ten pterodactyloids, the turning moments associated with the head + neck show a close and consistent correspondence with the rotational inertia of the whole body about a vertical axis in both groups, supporting the idea of a functional relationship. Turning moments come from calculating the lateral area of the head (plus any crests) and determining the associated lift (aerodynamic force) as a function of flight speed, with flight speeds being based on body mass. Rotational inertias were calculated from the three-dimensional mass distribution of the axial body, the limbs, and the flight membranes. The close correlation between turning moment and rotational inertia was used to revise the life restorations of two pterosaurs and to infer relatively lower flight speeds in another two.

Illusions of Self-Motion during Magnetic Resonance-Guided Focused Ultrasound Thalamotomy for Tremor.

Brain networks mediating vestibular perception of self-motion overlap with those mediating balance. A systematic mapping of vestibular perceptual pathways in the thalamus may reveal new brain modulation targets for improving balance in neurological conditions. Here, we systematically report how magnetic resonance-guided focused ultrasound surgery of the nucleus ventralis intermedius of the thalamus commonly evokes transient patient-reported illusions of self-motion. In 46 consecutive patients, we linked the descriptions of self-motion to sonication power and 3-dimensional (3D) coordinates of sonication targets. Target coordinates were normalized using a standard atlas, and a 3D model of the nucleus ventralis intermedius and adjacent structures was created to link sonication target to the illusion. A total of 63% of patients reported illusions of self-motion, which were more likely with increased sonication power and with targets located more inferiorly along the rostrocaudal axis. Higher power and more inferiorly targeted sonications increased the likelihood of experiencing illusions of self-motion by 4 and 2 times, respectively (odds ratios = 4.03 for power, 2.098 for location). The phenomenon of magnetic vestibular stimulation is the most plausible explanation for these illusions of self-motion. Temporary unilateral modulation of vestibular pathways (via magnetic resonance-guided focused ultrasound) unveils the central adaptation to the magnetic field-induced peripheral vestibular bias, leading to an explicable illusion of motion. Consequently, systematic mapping of vestibular perceptual pathways via magnetic resonance-guided focused ultrasound may reveal new intracerebral targets for improving balance in neurological conditions. ANN NEUROL 2024.

Robust Gaussian Process Regression Method for Efficient Tunneling Pathway Optimization: Application to Surface Processes.

Simulation of surface processes is a key part of computational chemistry that offers atomic-scale insights into mechanisms of heterogeneous catalysis, diffusion dynamics, and quantum tunneling phenomena. The most common theoretical approaches involve optimization of reaction pathways, including semiclassical tunneling pathways (called instantons). The computational effort can be demanding, especially for instanton optimizations with an ab initio electronic structure. Recently, machine learning has been applied to accelerate reaction-pathway optimization, showing great potential for a wide range of applications. However, previous methods still suffer from numerical and efficiency issues and were not designed for condensed-phase reactions. We propose an improved framework based on Gaussian process regression for general transformed coordinates, which has improved efficiency and numerical stability, and we propose a descriptor that combines internal and Cartesian coordinates suitable for modeling surface processes. We demonstrate with 11 instanton optimizations in three representative systems that the improved approach makes ab initio instanton optimization significantly cheaper, such that it becomes not much more expensive than a classical transition-state theory rate calculation.

Toe Box Shape of Running Shoes Affects In-Shoe Foot Displacement and Deformation: A Randomized Crossover Study

Background: Long-distance running is popular but associated with a high risk of injuries, particularly toe-related injuries. Limited research has focused on preventive measures, prompting exploration into the efficacy of raised toe box running shoes. Purpose: This study aimed to investigate the effect of running shoes with raised toe boxes on preventing toe injuries caused by distance running. Methods: A randomized crossover design involved 25 male marathon runners (height: 1.70 ± 0.02 m, weight: 62.6 + 4.5 kg) wearing both raised toe box (extended by 8 mm along the vertical axis and 3 mm along the sagittal axis) and regular toe box running shoes. Ground reaction force (GRF), in-shoe displacement, and degree of toe deformation (based on the distance change between the toe and the metatarsal head) were collected. Results: Wearing raised toe box shoes resulted in a significant reduction in vertical (p = 0.001) and antero–posterior (p = 0.015) ground reaction forces during the loading phase, with a notable increase in vertical ground reaction force during the toe-off phase (p < 0.001). In-shoe displacement showed significant decreased movement in the forefoot medial (p < 0.001) and rearfoot (medial: p < 0.001, lateral: p < 0.001) and significant increased displacement in the midfoot (medial: p = 0.002, lateral: p < 0.001). Impact severity on the hallux significantly decreased (p < 0.001), while impact on the small toes showed no significant reduction (p = 0.067). Conclusions: Raised toe box running shoes offer an effective means of reducing toe injuries caused by long-distance running.

Evaluating the Relation of Cave Passage Formation to Stress-Field: Spatio-Temporal Correlation of Speleogenesis with Active Tectonics in Asprorema Cave (Mt. Pinovo, Greece)

Caves serve as time capsules, preserving significant markers of tectonic activity and offering insights into geological history. Fault geometries and past activations found in caves can be correlated with known deformational events in the broader area, temporally delimiting the speleogenesis. More specifically, cave passage formation is suggested to be affected by the regional stress-field. The Asprorema Cave in Northern Greece is a typical example of a fracture guided cave, with passage geometry influenced by relative sidewall movements, revealing these discontinuities as faults. This study constructs the timeframe and conceptual model of speleogenesis in relation to tectonic events, geomorphological evolution and hydrological zones, and verifies its relation to the stress-field. Active tectonics, mineralogy and cave geomorphology are investigated. Results suggest syntectonic speleogenesis under phreatic and epiphreatic conditions. The absence of corrosion on fault slip surfaces implies recent activations post cave’s shift to the vadose zone. Structural analysis identifies three main neotectonic phases: NNW-SSE striking faults (oldest group of structures), NE-SW striking faults with dextral strike-slip movement (post-middle Miocene), and NE-SW striking normal faults indicating extensional stress-regime (Quartenary). The last two phases affect cave passage shape causing wall displacement, highlighting passage formation along discontinuities perpendicular to the horizontal minimum stress axis.

Analytical study of soliton dynamics in the realm of fractional extended shallow water wave equations

Abstract In this study, we use the Khater Method (KM) as an efficient analytical tool to solve (3+1)-dimensional fractional extended shallow water wave equations (FESWWEs) with conformable derivatives. The KM transforms fractional partial differential equations to ordinary differential equations (ODEs) via strategic variable transformation. Then, series-form solutions to these ODEs are proposed, which turn them into nonlinear algebraic systems. The solution to this set of algebraic equations yields shock travelling wave solutions expressed in hyperbolic, trigonometric, exponential, and rational functions. The study's findings are corroborated by 2D, 3D, and contour graphs that show the changing patterns of the detected shock travelling waves. These findings have important significance for the discipline, offering vital insights into the intricate dynamics of FESWWEs. The effectiveness of KM is demonstrated by its capacity to produce varied solutions and contribute to a thorough knowledge of such complex phenomena.

Comparison between 2D and 3D microstructures and implications for metamorphic constraints using a chloritoid–garnet-bearing mica schist

Abstract. Despite the fact that rock textures depend on the 3D spatial distribution of minerals, our tectono-metamorphic reconstructions are mostly based on a 2D visualisation (i.e. thin sections). This work compares 2D and 3D investigations of petrography and microstructures, modal abundances, and local bulk rock composition and their implication for P–T estimates, showing the pros and cons and reliability of 2D analysis. For this purpose, a chloritoid–garnet-bearing mica schist from the Dora-Maira Massif in the Western Alps has been chosen. In particular, for 2D a thin section scan has been combined with chemical X-ray maps, whereas for 3D the X-ray computerised axial microtomography (µCT) has been applied. Two-dimensional investigations are readily accessible and straightforward but do not consider the entire rock volume features. Conversely, the rise of 3D techniques offers a more comprehensive and realistic representation of metamorphic features in the 3D space. However, they are computationally intensive, requiring specialised tools and expertise. The choice between these approaches should be based on the research aims, available resources, and the level of detail needed to address specific scientific questions. Nevertheless, despite differences in the modal distribution, the estimated bulk rock compositions and relative thermodynamic modelled phase fields show similarities when comparing the 2D and 3D results. Also, since different thin section cut orientations may influence the results and consequent interpretations, three different cuts from the 3D model have been extrapolated and discussed (i.e. XZ, YZ, and XY planes of the finite-strain ellipsoid). This study quantitatively corroborates the reliability of the thin section approach for tectono-metamorphic reconstructions, still emphasising that 3D visualisation can help understand rock textures.

Aerodynamic performance and wake development of NACA 0018 airfoil with serrated gurney flaps

Improving the aerodynamic performance of the airfoil is important for optimising the rotor efficiency of the vertical axis wind turbines. As a simple passive control method, the Gurney flap is widely used to improve the aerodynamic performance of airfoils. In this paper, we study the impact of applying a novel serrated gurney flap with different heights on the NACA 0018 airfoil. An improved delayed detached eddy simulation method is adopted to investigate the lift-enhancing mechanism of the serrated gurney flap and the evolution of the downstream vortex system. The results show that the serrated gurney flap can effectively increase the airfoil lift coefficient and the lift-to-drag ratio. The improvement of the serrated gurney flap on the aerodynamic performance of the airfoil is more pronounced at moderate angles of attack. Further analysis of the downstream wake shows that a pair of vortices wraps over both sides of the airfoil and rotates perpendicular to the wake flow, which is produced by the columnar vortex upstream of the flap. These vortices mixed with the wake and accelerated the dissipation of the separated vortex on the suction surface of the airfoil.

New exact optical soliton solutions of the derivative nonlinear Schrödinger equation family

In this study, we use a systematic approach named the generalized unified method (GUM) to construct the general exact solutions of the derivative nonlinear Schrödinger (DNLS) family that also includes perturbed terms, which are the Kaup–Newell equation, the Chen–Lee–Liu equation, and the Gerdjikov–Ivanov equation. The GUM provides more general exact solutions with free parameters for nonlinear partial differential equations such that some solutions obtained by different exact solution methods, including the hyperbolic function solutions, the trigonometric function solutions, and the exponential solutions, are derived from these solutions by giving special values to these free parameters. Additionally, the used method reduces a large number of calculations compared to other exact solution methods, enabling computations to be made in a short, effortless, and elegant way. We investigate the DNLS family in this work because of its extensive applications in nonlinear optics. Particularly, the obtained optical soliton solutions of the DNLS family are useful for describing waves in optics and facilitating the interpretation of the propagation of solitons through optical fibers. Furthermore, this work not only contributes significantly to the advancement of soliton dynamics and their applications in photonic systems but also be productively used for more equations that occur in mathematical physics and engineering problems. Finally, 2D and 3D graphs of some derived solutions are plotted to illustrate behaviors of optical soliton.

Deep Reinforcement Learning-based Mining Task Offloading Scheme for Intelligent Connected Vehicles in UAV-aided MEC

The convergence of unmanned aerial vehicle (UAV)-aided mobile edge computing (MEC) networks and blockchain transforms the existing mobile networking paradigm. However, in the temporary hotspot scenario for intelligent connected vehicles (ICVs) in UAV-aided MEC networks, deploying blockchain-based services and applications in vehicles is generally impossible due to its high computational resource and storage requirements. One possible solution is to offload part of all the computational tasks to MEC servers wherever possible. Unfortunately, due to the limited availability and high mobility of the vehicles, there is still lacking simple solutions that can support low-latency and higher reliability networking services for ICVs. In this article, we study the task offloading problem of minimizing the total system latency and the optimal task offloading scheme, subject to constraints on the hover position coordinates of the UAV, the fixed bonuses, flexible transaction fees, transaction rates, mining difficulty, costs and battery energy consumption of the UAV. The problem is confirmed to be a challenging linear integer planning problem, we formulate the problem as a constrained Markov decision process. Deep Reinforcement Learning (DRL) has excellently solved sequential decision-making problems in dynamic ICVs environment, therefore, we propose a novel distributed DRL-based P-D3QN approach by using Prioritized Experience Replay strategy and the dueling double deep Q-network (D3QN) algorithm to solve the optimal task offloading policy effectively. Finally, experiment results show that compared with the benchmark scheme, the P-D3QN algorithm can bring about 26.24% latency improvement and increase about 42.26% offloading utility.

Semi-analytical calculation of the force between two magnets with rhombus-shaped cross-sections

Analytical calculations of interaction forces between permanent magnets are essential for the fast and accurate modeling of magnetic springs and bearings. Whereas extensive research has been conducted on interaction forces between cuboidal magnets, there is a lack of research on force calculations between other prismatic magnets in existing literature. This paper newly develops a semi-analytical method for force calculation between two magnets with rhombus-shaped cross-sections. The method is based on interaction force between two rectangular magnetically charged surfaces which are inclined toward each other. Under a Cartesian coordinate system, two components of the force between inclined rectangular magnetically charged surfaces are presented with fully analytical expressions, whereas the other component is expressed with one numerical integral. By applying these expressions repeatedly, the force between two magnets with rhombus-shaped cross-sections is derived. Moreover, a test rig is constructed to validate this semi-analytical method. Furthermore, the method can be extended to force calculations between prismatic magnets with arbitrary-shaped cross-sections, which allows a simple and fast modeling of many magnetic applications.

Vortex breakdown in the small Mach number regimes

The effect of compressibility for flow inside the cylinder with the top rotating lid (Vogel-Escudier flow) is examined. Three-dimensional Navier–Stokes equations for compressible flow in Cartesian coordinates are used to simulate the flow using open-source OpenFOAM software. The Mach number (Ma) of the flow is varied from 0.1 to 0.3, and the Reynolds number (Re) is varied from 1000 to 5000 for a fixed aspect ratio (Γ = 2.5) of the cylinder. The flow is found to have a transition from a steady axisymmetric state to a non-axisymmetric state exhibiting multiple azimuthal waves as the Mach number and the Reynolds number are varied. The flow field changes significantly with an increase in Ma for unsteady flow at higher Re. An increase in Ma increases the side wall azimuthal instability, as found in the perturbation contour plots and time series analysis. Further, we reconstruct phase portraits to show the dynamics of the flow finally becoming chaotic as the Reynolds number is increased to 5000. Finally, we support the argument with Lyapunov exponents for the higher Re samples. The Lyapunov Exponent is found to increase with Ma.

Is international student mobility still a distinctive strategy? A study of upper milieu students in Germany

ABSTRACT Drawing on Bourdieu’s theory of social reproduction, the article examines whether international student mobility (ISM) is still a distinctive educational strategy of upper-milieu students in the 21st century. As a result of the Bologna process, ISM has become widespread in Europe. Does this also mean that international mobility loses its distinctive character? Based on current studies that point to a differentiation within ISM, we investigate to what extent students from upper milieus may strive to re-establish the ‘structure of distances’ - as Bourdieu puts it – in the field of higher education. Our research design consists of 95 qualitative interviews with Master’s students in Germany. The study conducts a comparative analysis to differentiate between lower, middle and upper milieus (vertical axis), with the main focus of the research being directed towards the upper milieus. In addition, the differences within upper milieus (horizontal axis) are examined by including three academic disciplines in the research design: management/business administration, medicine, and musicology. The results of our study suggest that, even within the context of a knowledge society, characterised by an increased participation in higher education, there remain numerous symbolic, spatial, and cultural opportunities for students from upper milieus to distinguish their educational paths in distinct ways, e.g. the destinations chosen, the rhetorical framing of international mobility experiences, and the integration with work-related practices beyond the course of study.

Abstract PO5-22-02: Evaluation of a surface-guided and tattoo-less approach to setup for whole breast radiotherapy

Abstract Background: In preparation for adjuvant breast radiation therapy (RT), several small but permanent skin tattoo marks are often placed to assist with surface alignment for treatment setup and delivery. With advancements in surface-guided technologies, it may be possible to achieve setup accuracy with a “tattoo-less” approach, which can improve cosmetic and quality of life outcomes. This study evaluates the feasibility, accuracy, and potential dosimetric implications of a tattoo-less setup technique. Method: A retrospective analysis of 10 patients diagnosed with right-sided breast cancer who received adjuvant whole breast RT using a tattoo-less approach were included in this study. All patients received an initial whole breast dose of 42.56 Gray (Gy) in 16 daily fractions using a tangential three-dimensional conformal planning technique. This was followed by a 10Gy boost to the lumpectomy site delivered in 4 daily fractions. Daily setup for whole breast treatment was performed by aligning each patient to their individual reference breast surface generated from the planning computed tomography (CT) images via the Vision RT system. Bony landmarks were then verified via daily kV imaging, and translational shifts were recorded for each fraction. The kV imaging was performed to confirm the treatment positioning since the tattoo-less approach was new to the department. For 5 patients, dosimetric differences between initial surface alignment and shifts performed based on bony landmarks were evaluated by recalculating the original clinical plan with a new isocenter position using kV image shifts for each of their 16 treatment fractions. A plan sum of the 16 recalculated plans for each patient was used in further dosimetric analysis. Boost fractions were not included in this study, as setup was verified using surgical clips instead of bony anatomy. Results: Translational shifts for 158 fractions were reviewed as no kV imaging was performed for the other 2 fractions. The mean absolute kV imaging shift was 0.29 cm (CI (95%): 0.25, 0.32; range: 0 to 1.25) in the vertical axis, 0.28 cm (0.23, 0.32; 0 to 1.27) in the longitudinal axis, and 0.24 cm (0.20, 0.28; 0 to 1.98) in the lateral axis. Clinical plans for 5 patients were evaluated with a mean absolute kV shift of 0.27 cm (range: 0.15 to 0.39) in the vertical, 0.32 cm (0.13 to 0.77) in the longitudinal, and 0.29 cm (0.18 to 0.38) in the lateral directions. Dosimetric analysis revealed a slight increase in mean heart dose from the original clinical plan, with an average difference of 4.12 cGy (range: 0.7 to 10.5 cGy). The maximum increase in V20Gy of the ipsilateral lung was 2.7%. Less than 1% of change was observed in the maximum plan dose, as well as in the V95% coverage, expect for one patient, whose V95% was decreased from 99.6% to 94.6%. This difference was caused by a large longitudinal shift which could be attributed to possible patient movement. Conclusions: These findings demonstrate the feasibility and accuracy of a tattoo-less treatment approach in a small cohort of breast cancer patients receiving whole breast RT. Further investigation with larger cohorts is warranted. Citation Format: Xinxin Zhang, Swati Mamidanna, Yin Zhang, Xiao Wang, Ning Yue, Shicha Kumar, Lindsay Potdevin, Maria Kowzun, Mridula George, Lara Hathout, Bruce Haffty, Nisha Ohri. Evaluation of a surface-guided and tattoo-less approach to setup for whole breast radiotherapy [abstract]. In: Proceedings of the 2023 San Antonio Breast Cancer Symposium; 2023 Dec 5-9; San Antonio, TX. Philadelphia (PA): AACR; Cancer Res 2024;84(9 Suppl):Abstract nr PO5-22-02.

Preoperative low Hounsfield units in the lumbar spine are associated with postoperative mechanical complications in adult spinal deformity.

To determine the most valid bone health parameter to predict mechanical complications (MCs) following surgery for adult spinal deformity (ASD). This multicenter study retrospectively examined the records of patients who had undergone fusion of three or more motion segments, including the pelvis, with a minimum two-year follow-up period. Patients with moderate and severe global alignment and proportion scores were included in the study and divided into two groups: those who developed MCs and those who did not. Bone mineral density (BMD) of the lumbar spine and femoral neck was measured using dual-energy X-ray absorptiometry, and Hounsfield units (HUs) were measured in the lumbar spine on computed tomography. Radiographic parameters were evaluated preoperatively, immediately after surgery, and at final follow-up. Of 108 patients, 30 (27.8%) developed MCs, including 26 cases of proximal junctional kyphosis/failure, 2 of distal junctional failure, 6 of rod fracture, and 11 reoperations. HUs were significantly lower in patients who experienced MCs (113.7 ± 41.1) than in those who did not (137.0 ± 46.8; P = 0.02). BMD did not differ significantly between the two groups. The preoperative and two-year postoperative global tilt, as well as the immediately postoperative sagittal vertical axis, were significantly greater in patients who developed MCs than in those who did not (P = 0.02, P < 0.01, and P = 0.01, respectively). Patients who experienced MCs following surgery for ASD had lower HUs than those who did not. HUs may therefore be more useful than BMD for predicting MCs following surgery for ASD.

Mechanical behavior and performance evolution of railway ballast track under dynamic stabiliser based on the hybrid MBD-DEM simulation

The uncertainty in local structure and time-variable compaction of ballast aggregates poses challenges in selecting suitable stabilization methods and parameters for ballast tracks in practical engineering, often resulting in suboptimal operational outcomes. To address this issue comprehensively, the spatial hybrid model of the double dynamic stabilisers-ballast track (MBD-DEM) is proposed in this paper. Subsequent numerical simulations of stabilisation operations are conducted to elucidate ballast vibration, migration behavior and the evolution of ballast track resistance under varying initial conditions of the ballast bed. Initially, leveraging multibody dynamics theory (MBD) and discrete element method (DEM), a MBD model of double stabilisers and a DEM ballast track model containing 6 sleepers were established respectively. Using the coupling interface, the real-time hybrid calculation of these two models is achieved through 6 sleepers in the middle of the ballast bed. Subsequently, the model's accuracy was validated by comparing test data from stabilisation vehicle operations on a Kunming Railway Bureau test line with simulation data from the dynamic double stabilisers-ballast track spatial hybrid model. Finally, utilizing the proposed hybrid model, the dynamic behavior, contact states, and movement rules of ballast particles during stabilisation operations on both loose and initially stable ballast beds (LBB and ISBB) were investigated at the mesoscopic scale. Concurrently, an in-depth analysis of lateral resistance changes in the ballast bed before and after the stabilisation operation is presented. The relevant findings effectively unveil the evolution of dynamic behavior in the ballast bed during stabilisation operations, concluding with practical suggestions for on-site operations. Simulation results illustrate that the rotation of ballast particles in the XY plane beneath each sleeper is predominantly characterized by harmonic rotation. With an increase in the depth of the ballast bed, the range of the rotation axis for combined angular velocity diminishes, leading to the phenomenon of rotation axis deflection. To ensure operational safety and efficiency, a minimum of two-times stabilization operations is recommended for loose ballast beds (LBB), with three-times operations considered optimal. For initially stable ballast beds (ISBB), one-time stabilization operation is basically sufficient.

Importance of the cervical paraspinal muscles in postoperative patient-reported outcomes and maintenance of sagittal alignment after anterior cervical discectomy and fusion.

The aim of this study was to investigate the influence of preoperatively assessed paraspinal muscle parameters on postoperative patient-reported outcomes and maintenance of cervical sagittal alignment after anterior cervical discectomy and fusion (ACDF). Patients with preoperative and postoperative standing cervical spine lateral radiographs and preoperative cervical MRI who underwent an ACDF between 2015 and 2018 were reviewed. Muscles from C3 to C7 were segmented into 4 functional groups: anterior, posteromedial, posterolateral, and sternocleidomastoid. The functional cross-sectional area and also the percent fat infiltration (FI) were calculated for all groups. Radiographic alignment parameters collected preoperatively and postoperatively included C2-7 lordosis and C2-7 sagittal vertical axis (SVA). Neck Disability Index (NDI) scores were recorded preoperatively and at 2 and 4-6 months postoperatively. To investigate the relationship between muscle parameters and postoperative changes in sagittal alignment, multivariable linear mixed models were used. Multivariable linear regression models were used to analyze the correlations between the changes in NDI scores and the muscles' FI. A total of 168 patients with NDI and 157 patients with sagittal alignment measurements with a median follow-up of 364 days were reviewed. The mixed models showed that a greater functional cross-sectional area of the posterolateral muscle group at each subaxial level and less FI at C4-6 were significantly associated with less progression of C2-7 SVA over time. Moreover, there was a significant correlation between greater FI of the posteromedial muscle group measured at the C7 level and less NDI improvement at 4-6 months after ACDF. The findings highlight the importance of preoperative assessment of the cervical paraspinal muscle morphology as a predictor for patient-reported outcomes and maintenance of C2-7 SVA after ACDF.

Effect of number of blades on performance and wake recovery for a vertical axis helical hydrokinetic turbine

Effect of number of blades on performance and wake recovery for a vertical axis helical hydrokinetic turbine

Consideration of various configurations of SG6043-based rotor applied in small capacity horizontal axis wind turbine

The SG6043 airfoil model is well known for its high aerodynamic efficiency and it is suitable for designing small wind turbine blades. This paper determined the optimal blade configurations using only the SG6043 airfoil model with ten different lengths from 1 m to 10 m. Then, it proposed the most suitable model for a rated wind speed of 5 m/s in Vietnam. The chord and twist values of each blade’s part were optimized by using the Betz optimization method (BOM) in the Qblade open software. Several important characteristic quantities such as lift coefficient (Cl), drag coefficient (Cd), power factor (Cp) and power (P) of the different blade configurations are determined by using a combination of both XFLR5 code and Qblade software. After that, parameters related to operation such as pitch angle and rotation speed of the rotor were also investigated to find the operating conditions for the best efficiency of wind energy exploitation. The obtained results show that the Cp of the blades has a maximum value of about 0.476 and the P has a value of up to 95.319 kW in operating conditions with a wind speed range between 1 m/s and 10 m/s. In addition, the ratios of power to blade surface area (P/S) and the ratios of power to blade volume (P/V) at the wind speed of 5 m/s were also investigated. The results show that rotors with blades ranging from 3 m to 5 m will give much higher P/S and P/V values than other blade configurations under these operating conditions. This emphasizes that these blade configurations will bring more economic benefit because they will consume less material and reduce production time while still ensuring the required capacity value. Finally, the 5 m blade rotor with a capacity of 2.750 kW at a rated wind speed of 5 m/s was proposed as the rotor suitable for individual household use. This design can help millions of Vietnamese households be proactive in their power source, thereby contributing to the significant reduction of CO2 emissions from coal-fired power plants.

Probabilistic models applied to concrete corrosion depth prediction under sulfuric acid environment

Accurate prediction of corrosion depth degradation law can provide a basis for the determination of the sacrificial layer thickness and the cover thickness of the concrete structural members in a corrosive environment. This study aims to explore a more accurate and safe method to predict corrosion depth. Six sets of concrete cylinder concrete specimens were adopted to perform an accelerated corrosion test in sulfuric acid solution with pH ≈ 0.95 for six different scheduled durations. 3D coordinates of a large number of points on the corroded cylindrical surface were obtained with the help of the 3D laser scanning technology. Then, a comparative study was carried out for the corrosion depth measured with the laser scanning method and vernier caliper method. The results prove that concrete corrosion depth predicted by the Gaussian random process model established by the laser scanning method was considered to possess higher credibility and better security.